ATEX Emergency Broadcasting Hotline with Door

Complete ATEX Weatherproof Broadcasting System

IP67 rated telephone with optinal external horn sounder, LED flashing call beacon and junction box. The system provides exeptional call alertinging and broadcasting functions within harah noisy industrial environments. The telephone is available in the following models; Analogue, VoIP SIP.

ATEX Approved Emergency Hotline

Available to analogue line or VoIP SIP PoE and programmable for speed dialling 4 number in sequence (VoIP) with a non-volatile memory. The hotlines simple functionality is ideal for emergency and service use. Simply lift handset from the magnetic receiver to autodial the pre-stored number or lift handset to receive inbound call. The standard analogue version dials 1 pre-stored number with a non-volatile memory.

ATEX Classification

For explosive gas atmospheres Zone 1 and Zone 2 - II 2G Rx e ib [ib] mb IIC T6 Gb, III 2D Ex ib [ib] tb IIIC T135 °, -40 °C ≤ Ta ≤ +60 °C/+40°C, Zone 1, 2, 22. For explosive atmosphere; IIA, IIB. For dust; Zone 20, Zone 21 and Zone 22.)

IP66 Weatherproof Telephone

ATEX Series Telephones are designed for use in hazardous and demanding environments, the telephone enclosure provides protection from the ingress of dust, dirt and fibres as well as resistance against the harmful and corrosive effects of water spray, rain sleet or snow. Suitable for temperatures between -40 to +60 deg C. The loud ringer with quality clear audio is adjustable up to 95dB (VoIP / SIP) and 80-85 DB (Analogue). The additional external ATEX horn speaker (110DB@1m) and LED flashing beacons can be specified for use within extreme ambient noise zones. The weatherproof IP66 rating conforms to EN60529, even when the door is open, guarantees optimum performance in uncompromising environments. Full duplex, high quality acoustic properties, programmable by DTMF or via web interface (Version Dependent) to ensure optimum locational performance. 

Robust and Vandal Resistant

Impact protection IK10 in accordance to EN50102, housed within corrosion resistant aluminium alloy die cast enclosure, with NPT conduit entries, a unique external telephone compromising off a robust handset, steel armoured cable and anti-tamper fixings. The rugged telephone is ideal for placing within heavy Industrial and Emergency locations and can be mounted to either a wall, pillar or post (see our range).

Internal Relay's - Controlled by Operators Telephone Keypad

Option for two internal relays with the VoIP telephone. The analogue version can be customised to include 2 relays upon request. Enter a PIN code via telephone keypad to open door or gate, sound an alarm, switch on a camera or light etc.

Disable Assistance Fitted Hearing Loop Technology

Induction Loop Technology is fitted to the telephone handset as standard to assist hard of hearing users.

Simple to Setup and Maintain

Programming by way of DTMF for Analogue Networks and powered by Analogue Line. The VoIP SIP version is powered by PoE and programmed via web interface.

Choice of Colours

Industrial high-performance epoxy powder coating in RAL colours. Red as standard, however, other colours are available such as; yellow, blue or orange.

Need a Free Standing or Mounted Option?

Free-Standing options available with the ATEX Series Telephones with option for pillar or post mounting.

FC - This mark indicates compliance with FCC Part 15 Subpart B Class B

CE - This mark indicates compliance with the: Radio and Telecommunications Terminal Equipment Directive 2004/108/EC